• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Recent content by cdn_xj

  1. C

    Tera 2 Low kit with a wide chain

    No such thing as 10.9 stainless. It's either 10.9 If steel or A2 or A4 if stainless. 😉
  2. C

    8.25 diff skid, anyone ever run one?

    I'm a fan of the Nth Degree Diff slider simply because it extends forward far enough to protect the pinion yoke and u-joint. BUT, they do not make one for the C8.25. Just the D44. That said, I have Ruffstuff diff covers on both the front and rear diffs and have been very happy with them.
  3. C

    novak shift linkage =dissapiontment

    I've just installed the Boostwerks into my XJ. No disrespect to Novak; from everything that I have read while researching what option *I* wanted to employ, Novak makes a quality product. I just decided to go with Boostwerks because the price point worked for me and I prefer linkage rather than...
  4. C

    WTB 97- 01 CHEROKEE white factory fender flares

    Like i said, Stone White as opposed to Bright White and in pretty good condition. Bottom leading edge of the rears are somewhat worn from rock chips and there are a few scuffs, but all are intact. No cracks or significant damage. I'm in BC but could meet you somewhere in the middle.
  5. C

    WTB 97- 01 CHEROKEE white factory fender flares

    A pair? Or a set? ;) I've got a set of stone white flares. I can post a picture later tonight.
  6. C

    WTB: ORFab rear 1/4 guards w/Rails

    Found a set. Mods please delete
  7. C

    WTB: ORFab rear 1/4 guards w/Rails

    Well, my fault for not checking more frequently but just when I'm ready to buy a set of ORFab rear 1/4 guards, they close their doors. Anyhow, if anyone's got a set they're looking to get rid of, shoot me a PM. No, I won't accept Rusty's or JCR Offroad, or anyone else's. Must be ORFab. Thanks.
  8. C

    ARB bumper, which winch

    If you are using synthetic line then disregard all the detail about the roller fairlead. Hawse will bolt up fine.
  9. C

    ARB bumper, which winch

    First of all: Welcome. Secondly, ARB and Warn are pretty buddy-buddy and the ARB bars tend to be designed around Warn winches. That being said, you should be able to find the dimensions for the Warn M-series winch online. Just check to make sure that the mounting hole locations and the...
  10. C

    Engine Mount shim/transfer case drop

    When I had my YJ a T/C drop was part of the lift kit due to the very short rear driveshaft (and my being too cheap to invest in an SYE at the time). It ran that way for many. many years and I never experienced any undue engine mount wear or failure. I've not seen or heard of anyone shimming...
  11. C

    Mystery front end clunk - no it's not TRE's.

    I was chasing a front end clunk for months, although it felt like years. Turned out to be the track bar frame-side bracket mounting bolts. The weren't super loose, but loose enough to allow the bracket to shift slightly. I really had to reef on them to snug them to the point that the bracket...
  12. C

    Steel tail lights

    PM Replied to. :)
  13. C

    Strange clunk after 3.5" lift

    Check your trackbar mounting bolts, in particular the frame-side mount. The trackbar has to contend with a LOT of forces. So much so that even though the mount seems tight it can still shift and clunk. I was chasing a clunk in the steering for months before i finally figured it out.
  14. C

    Steel tail lights

    Ok. What email would you like me to Paypal to?
  15. C

    Steel tail lights

    I am. How much to ship to 98295 (Sumas, WA)?
See more
Back
Top