• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Recent content by ~Ace~~

  1. A

    350 in XJ

    4 Bolt mains have Smaller webbing in the block, and are more often cracked... so Why a 4 bolt main ?
  2. A

    Distributor gear questions

    Check the Oil Pump..... if it's locking up it will cause your problems. the Dist. gear is much softer than the gear on the cam. You can look in the Dist hole and verify the condition of the cam gear. ~Ace~
  3. A

    Winch Bolts

    Manufacturers don't always do what is Best for the consumer, but rather what is best for their Legal department... Often they supply bolts that are not as strong as "Normal" bolts of the same grade, expecting the bolts to fail before major damage to the vehicle happens... Preventing lawsuits...
  4. A

    HP Super 30 VS. LP D44 w/axleshafts?

    Damn,..... Sure glad Dana 44's have Much stronger Ball joints..... :clap:
  5. A

    HP Super 30 VS. LP D44 w/axleshafts?

    Axle Flex, Carrier Flex, Ring gear Flex, these are what cause parts to fail Inside the axle. A Trussed 30 is Not as strong as a stock 44 when comparing the tubes and housing. The Large Ring gear, even with a Slightly smaller contact pattern is Still Larger, and resists deflection Much...
  6. A

    HP Super 30 VS. LP D44 w/axleshafts?

    There is no comparing a real Dana 44 to a 30... Unless your someone with Way to much $ in a turdy. The D-30 is a 1/4 ton light duty axle. The D-44 Low Pinion was used in 1/2, 3/4 and some 1 Ton Full size trucks for 30 years ? The HP VS. LP debate is not really one of strength, LP 44's are...
  7. A

    ~Wanted~ Renix throttle linkage and Knock Sensor

    Still Need this linkage pretty bad, Not wanting to Trail Test my wire ties :) ~Ace~
  8. A

    Converter missing, any issues?

    Anyone with a Mild understanding of Volumetric effeciency would not ask such a question, Anything that restrists flow, even mildly does NOT Help a motor, now, to clarify this, the computer in said car may Want to see the effects of the cat, but it Does decrease effeciency, Period. I do not...
  9. A

    Converter missing, any issues?

    Sad... how the hell did he get Certified if he talks Nonsense ! ? ! ? ! How the Hell could it change the Valve timing ? was the cat connected to the timing chain ? Lmao... Give me a break Back Pressure Sucks, anyone that claims otherwise has no clue what they are talking about, they are...
  10. A

    ~Wanted~ Renix throttle linkage and Knock Sensor

    Hardin county, South Central TN. How much for the linkage shipped ?
  11. A

    Low pinon waggy set up

    LP 44's came in Full size 3/4 ton trucks with Big Blocks... Nuff said
  12. A

    ~Wanted~ Renix throttle linkage and Knock Sensor

    I need the linkage that connects between the throttle body and the dogleg, and a knock sensor if anyone has one, I'm working on a basket case and slowly finding out what parts I'm missing... Also needs a battery tray ? Thanks in advance, ~Ace~
  13. A

    Homebrew Rear Gas Can Holder

    I'd make a 3/8" solid steel box to hold the can, with some Major locks... 5 Gal of gas is some Valuable crap !
  14. A

    Keep blowing front ujoint...

    Is he breaking Axle joints ? or the Driveshaft joint and pinion ?
  15. A

    what does a 4.0 weigh?

    Do you mean a 351 Windsor, Modified or Cleveland ? They are all F(*&D Products, and should be taken to the scrap yard NOW.... so it does not matter, but as I recall, one of them was a BB. ~Ace~
See more
Back
Top