Hey guys,
i bought a great XJ from 89 two weeks ago.
I drove it 250km home and except from some rust it looks great. Just needs some love.
Fist thing i did on the technical side of things, was to renew the Sparkplugs (Champion) the Wires, the Cap and the Finger.
Else i did Tips 1-5 from Cruisers Homepage.
I rebuilt the Cables to and from the Batterie, Ground, Starter Motor, added two seperate grounds as per Cruiser.
Got rid of faulty cables, cleaned every connector i could get my hands on, cleaned the Ignition Coil on the inside and put some Contactgrease inside.
Now what is wrong?
At around 1-1.5k rpm and above the jeep stutters and missfires like crazy, it ran 250km back home just fine, was stumbeling slightly at around 2k on the highway, but accelerating completely worked and it was nice to drive.
Now i cant even drive since it stutters so bad that its unbearable.
Yesterday i installed a FelPro Gasket since the Valvecover was basically just attached with RTV and i swapt the "Frontpart" of the Vacuum Harness, to the Cover and such, after that i tried it again.
It starts, when i rev it to 1-1.5k it stutters and a relay (picture attached) made a spar, just once, accelerating again and again didnt cause a spark or anything, yet it still accelerates like shit.
I tried everything in P btw. didnt want to drive it like that, yet i drove back and forth a bit and you cant drive it like that...
Anyone any idea what i could check next?
Pictures and a Video inside:
https://drive.google.com/drive/folders/157s7qYiyzv3iQNeY8jsAXMOMuGTboH-F?usp=sharing
i bought a great XJ from 89 two weeks ago.
I drove it 250km home and except from some rust it looks great. Just needs some love.
Fist thing i did on the technical side of things, was to renew the Sparkplugs (Champion) the Wires, the Cap and the Finger.
Else i did Tips 1-5 from Cruisers Homepage.
I rebuilt the Cables to and from the Batterie, Ground, Starter Motor, added two seperate grounds as per Cruiser.
Got rid of faulty cables, cleaned every connector i could get my hands on, cleaned the Ignition Coil on the inside and put some Contactgrease inside.
Now what is wrong?
At around 1-1.5k rpm and above the jeep stutters and missfires like crazy, it ran 250km back home just fine, was stumbeling slightly at around 2k on the highway, but accelerating completely worked and it was nice to drive.
Now i cant even drive since it stutters so bad that its unbearable.
Yesterday i installed a FelPro Gasket since the Valvecover was basically just attached with RTV and i swapt the "Frontpart" of the Vacuum Harness, to the Cover and such, after that i tried it again.
It starts, when i rev it to 1-1.5k it stutters and a relay (picture attached) made a spar, just once, accelerating again and again didnt cause a spark or anything, yet it still accelerates like shit.
I tried everything in P btw. didnt want to drive it like that, yet i drove back and forth a bit and you cant drive it like that...
Anyone any idea what i could check next?
Pictures and a Video inside:
https://drive.google.com/drive/folders/157s7qYiyzv3iQNeY8jsAXMOMuGTboH-F?usp=sharing