essvee
NAXJA Forum User
- Location
- Portland, OR
97XJ, its been doing this for as long as I can remember.
Jeep has been sitting for a day - you go out, turn the key, it will crank and sputter if you hold the key down but it will never start.
Same behavior if you turn the key to prime the fuel pump and then turn to ignition.
If you back off and try to start again, it'll start right up.
No codes, no codes stored, no codes pending.
Fuel pump assembly was replaced, no impact.
Fuel pressure is good, though it does bleed down over a day. Even so, priming the system before trying to start it should alleviate any issues (that's what I think anyway).
Battery seems fine, but regardless it behaves exactly the same if you jump it from a running truck.
Any ideas?
Jeep has been sitting for a day - you go out, turn the key, it will crank and sputter if you hold the key down but it will never start.
Same behavior if you turn the key to prime the fuel pump and then turn to ignition.
If you back off and try to start again, it'll start right up.
No codes, no codes stored, no codes pending.
Fuel pump assembly was replaced, no impact.
Fuel pressure is good, though it does bleed down over a day. Even so, priming the system before trying to start it should alleviate any issues (that's what I think anyway).
Battery seems fine, but regardless it behaves exactly the same if you jump it from a running truck.
Any ideas?