Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
Anyone know the thread pitch and size of the oem radiator petcock off the top of their head? I wanna replace the cheesy plastic thing with some metal
Thanks!
Note from DJ Another possible solution Radiator drain leaking http://www.naxja.org/forum/showthread.php?t=1037404 Post #9 by shanesaw I have a 1991+ radiator from AutoZone and I replaced the plug with a 1/4" NPT street elbow and then connected a 1/4" X 3" nipple with a cap. If yours has the same sized petcock, (anyone know if the '98 uses the same open system rad as a 1991?) then you should be able to do what I did or use a 1/4" NPT plug. I got the hardware at a True Value but Home Depot usually has 1/4" pipe fittings in brass. Just be careful when you thread it in. If you tighten it too much it will start bending the bung on the metal end-tank.