power Comfort Switch missing from dash

On the 87 i just got i see i have the hole in the dash and the 3 pin connector is still there on the harness but the whole switch is just missing.

I read that on later years the transmission was just set to the power setting and switch was omitted but as i have it i was thinking does anyone know what the connections should be?

I'm guessing with the 3 polls on whats left of the connector its an earth or common and then the power/comfort section. does someone know what wires relate to each setting?

if i was to delete this all together what 2 would i connect just for power?

Thanks
Dave

FSM is your friend.

Johnnie Walker said:

FSM is your friend.

Click to expand...

Can someone tell me where the best place is to get one is or if they have one handy could they even look this up?

Thanks
Dave

You can usually find them on eBay. There are books for the engine/body, electrical/HVAC, and another for maintenance stuff.

Here is a pinout of the TCU. From what I can tell the switch just sends power to pin 11 when Power is selected

Bloody fantastic!! thanks so much for your help.

Dave