Yep thats right all the lengths are horrible and itll never work. Or your wrong. It cycles very well, the bracket is from teraflex and the ubolts are just used to hold it in position for mocking up. Of coure its going to be welded it has not even left the shop yet. By the way the upper link kit is from the wrangler kit and it seems to work just fine. There is NO bind. The angles worksince we tacked everything in place and cycled it to make sure there was no bind. The king air bumps still need to be installed to bump it out before the oil pan. Along with the hydraulic steering.
But keep the questions coming and I'll answer them best I can. The kit was cycled several times before finally being installed. And the upper link brackets on the frame side clear 35s full lock up and down.