- Location
- Warsaw, IN
Does anybody know if an aussie locker out of a 2000 tj with a dana 35 will work in a 91 xj with a dana 35?
Thanks,
Ben
Thanks,
Ben
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Question about an aussie
- Thread starter Jeepguy91
- Start date
lancey3
NAXJA Forum User
- Location
- Columbus Ohio
Not sure but just buy a Dana 44 with that money.
- Location
- Warsaw, IN
Well i only paid $125 for it and didn't research it first to see if it would work? Now i don't think it is going to work for me but just wanted to make sure first.
JNickel101
NAXJA Forum User
- Location
- Alamogordo, NM
a D35 is a D35....just different bracketry on the outside...same shit on the inside.
XJMarty
NAXJA Forum User
- Location
- Czech Republic
no, it is not.
tha carrier is different, it depends if both dana 35 have ABS if not it won´t probalby work
tha carrier is different, it depends if both dana 35 have ABS if not it won´t probalby work
JNickel101
NAXJA Forum User
- Location
- Alamogordo, NM
Yeah, missed it that Aussie makes a separate locker (2 different ones) for the TJ. My bad.
Last edited:
- Location
- Warsaw, IN
So if it came out of a 00 tj, then it probably wont work?
IllianaXJ
NAXJA Forum User
- Location
- Southwest IN
00 TJ P/N - Aussie Locker XD-13530
91 XJ P/N - Aussie Locker XD-13527
Probably not gonna work. Relist it on JU or JeepForum and make your money back or maybe more.
91 XJ P/N - Aussie Locker XD-13527
Probably not gonna work. Relist it on JU or JeepForum and make your money back or maybe more.
sjx40250
NAXJA Forum User
- Location
- Alexandria VA
Or contact Aussie for explaination of difference and if you can upgrade parts.
Not recommended for on street use in the rear.
Not recommended for on street use in the rear.
