white_elephant
NAXJA Forum User
- Location
- miami
im going to change my motor mounts tomorrow..what is the best way to change them with a jack....i mean under the engine..where do i place the jack and how?? help,advices...thanks....
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
best way to change motor mounts...
- Thread starter white_elephant
- Start date
- Location
- Mission Viejo
2x6 or piece of plywood under the oil pan. It holds pretty well
aroncull
NAXJA Forum User
- Location
- North Denver, CO
--Wrong forum--
Oem forum, please...
I dont know, but here is a review/write up on the M.O.R.E Bomb Proofs:
http://jeepin.com/features/more/
Talks about his install process.....
Oem forum, please...
I dont know, but here is a review/write up on the M.O.R.E Bomb Proofs:
http://jeepin.com/features/more/
Talks about his install process.....
krelja
NAXJA Forum User
- Location
- New Jersey
if you have TC drop then take it out before you start taking it apart. Jason's article @ jeepin.com is good but the wood concoction he has is a little decieving. When I put the wood on the oil pan I put it on a angle to catch as much of the pan as possible.
white_elephant
NAXJA Forum User
- Location
- miami
why do i need to remove the transfer case drop thingy?
- Location
- Lafayette, CA
I just changed mine two weeks ago, and I have the TnT belly pan which has a 1''TC drop built into it.
I ddint unbolt it. Was actually only about a 5 hour job working easily, minus the fact that one of the studs on the frame side broke, and I had to find a welder to reweld it.
I ddint unbolt it. Was actually only about a 5 hour job working easily, minus the fact that one of the studs on the frame side broke, and I had to find a welder to reweld it.
