buckwing0
NAXJA Forum User
- Location
- washington
I have an 85 xj with the 207 5speed, what other t/c can I hook up to the 5 speed?
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
transfer case
- Thread starter buckwing0
- Start date
5-90
NAXJA Forum User
- Location
- Hammerspace
You should be able to use the NP231 or NP242, or maybe the D300 - the screw patterns are the same (the New Process cases use the D300 pattern.)
However, you'll have to make sure you get the correct input gear (21-spline,) or swap for a later transmission as well (so you get the 23-spline input, and your options open up.)
5-90
By the way - the "207" is probably the NP207 transfer case - I'd have to look up which transmission you have (the AMC 150 probably got the AX-4 four-speed or AX-5 five-speed, but I don't recall what went behind the GM 2.8. At least it wasn't the damn Peugeot - that was only found behind the AMC242 from 1987 to mid-1989...)
5-90
However, you'll have to make sure you get the correct input gear (21-spline,) or swap for a later transmission as well (so you get the 23-spline input, and your options open up.)
5-90
By the way - the "207" is probably the NP207 transfer case - I'd have to look up which transmission you have (the AMC 150 probably got the AX-4 four-speed or AX-5 five-speed, but I don't recall what went behind the GM 2.8. At least it wasn't the damn Peugeot - that was only found behind the AMC242 from 1987 to mid-1989...)
5-90
Slug 369
NAXJA Forum User
- Location
- Plainfield, IL
If you find out you can use the 231, I have 3 for sale. One from a 94 XJ, one from a 94 YJ with an sye, and a third from a 97 TJ four banger. Email me at [email protected] if interested in any of them.