bamajeepjunkie
NAXJA Forum User
- Location
- moulton,alabama
what are the 2 ports in the throttle body for mine are open it's a 88 4.0
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
vac lines tb?
- Thread starter bamajeepjunkie
- Start date
MachineMan
NAXJA Forum User
- Location
- San Jose, CA
If you are refering to the vacuum ports on the engine side of the TB then the lower goes to the MAP sensor and the one above it is plugged.
bamajeepjunkie
NAXJA Forum User
- Location
- moulton,alabama
both are open now is your's an automatic or does it matter it does idle high
Matthew Currie
NAXJA Member #760
- Location
- Vermont, land of big clay
bamajeepjunkie said:
One of those holes should be blind (no hole through it), and the other is a vacuum port for the MAP sensor (the one on the firewall). I've forgotten which hole is which, but if you look carefully it should be obvious. The line from the MAP sensor is supposed to have a double plug on it, with one part that goes into the blind hole, and one that actually communicates with the vacuum port.
