Roxtar
NAXJA Forum User
- Location
- NW Indiana-Chicago area
I'm looking for recomendations on the lowest safe pressure to run in 32-11.50X15s on 8" 767s.
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
How low can I go?
- Thread starter Roxtar
- Start date
BrettM
NAXJA Forum User
- Location
- michifornia
depends on how you use it, terrain, etc. but I would say to try 10psi
hpi_jeep
NAXJA Forum User
- Location
- Mid-Missouri
if it helps at all i ran 12psi with 33x12.5 on 8" wheels and never had any come off the bead, and the tires did have a big belly in them at only 12psi.
it matters alot on your tires though, try running 10 psi and if you blow a couple beads you know it's to low. its not to hard to reset a bead just get some ether and a lighter :flame: but be carefull
it matters alot on your tires though, try running 10 psi and if you blow a couple beads you know it's to low. its not to hard to reset a bead just get some ether and a lighter :flame: but be carefull
Fire Good!
and here is some video of my dumb ass reseting a beed with break cleaner, fire and a little help from Rusty the wonderdog... the reason everone is busting up is the lighter is one of the adult store gag lighers and it says "Fu©k you!" 2 times every time you use it!
Trying to reseat a bead.. 1.3MB
Still trying... 1.9MB
Third times a charm! 4.2MB
and here is some video of my dumb ass reseting a beed with break cleaner, fire and a little help from Rusty the wonderdog... the reason everone is busting up is the lighter is one of the adult store gag lighers and it says "Fu©k you!" 2 times every time you use it!
Trying to reseat a bead.. 1.3MB
Still trying... 1.9MB
Third times a charm! 4.2MB
