c-clips for chrysler 8.25 27 spline

Tonybeirut · Oct 30, 2016

guys i searched everywhere for Chrysler 8.25 27 spline c-clips , all i can find are c-clips for 29 spline , mostly yukon YUK-YSPCC-010 but they mentioned that they are not compatible with 27 spline axle shafts.
anyone can link me to the correct ones i need?
thank you

8Mud · Oct 31, 2016

Try different search terms, "axle shaft retainer". Jeep calls it "lock drive shaft" and only has one number 2852 883 for the 27 and the 29.

http://www.morris4x4center.com/jeep-parts-catalogs/universal/1994-1996-Jeep-Parts-Catalog.pdf Check figure 3-120 item 33 and figure 3-120 item 1 bottom of the list.

The year/model of your XJ may be helpful.

Morris 4X4 says their C-clip will fit multiple axles, all Chrysler 8.25, some Fords and some Chevies.

http://www.morris4x4center.com/c-clip-rrp-yspcc010.html

md21722 · Oct 31, 2016

Where does it say they are not compatible? Here https://www.yukongear.com/productdetails.aspx?ProdID=8527 it lists the applications. Shafts, carriers, side gears, and center pins are different between 27 and 29 spline. Axle bearings, seals, gears, c-clips, and housings are interchangeable. Have you damaged or misplaced yours? They are not typically replaced during a normal rebuild.

Tonybeirut · Oct 31, 2016

md21722 said:
Where does it say they are not compatible? Here https://www.yukongear.com/productdetails.aspx?ProdID=8527 it lists the applications. Shafts, carriers, side gears, and center pins are different between 27 and 29 spline. Axle bearings, seals, gears, c-clips, and housings are interchangeable. Have you damaged or misplaced yours? They are not typically replaced during a normal rebuild.

At rockauto.com it mentions for 29 spline only.
I have a play I my rear tire when I force it in and out and it's around 4mm play.
I already have the Yukon C clips but I'm afraid to place them.

RCP Phx · Oct 31, 2016

While that seems a little excessive, it's not unheard of. The center pin may also have a lot of wear. They both play a role in end play!

Tonybeirut · Oct 31, 2016

RCP Phx said:
While that seems a little excessive, it's not unheard of. The center pin may also have a lot of wear. They both play a role in end play!

I still in brake period for the new 8.25 diff full rebuild with new Arb center pin also. But i swapped 2 Used axle Shafts Coz Mine Were Worn Ans I Had this play on Them Since Day 1 Especially the Right Side one. I Have the 29 Spl C clips But I Was Afraid They willL fall If they Are Bigger than The 27 ones.

RCP Phx · Oct 31, 2016

The side gears and thrust washers also affect the end play!

c-clips for chrysler 8.25 27 spline

Tonybeirut

NAXJA Forum User

8Mud

NAXJA Forum User

md21722

NAXJA Forum User

Tonybeirut

NAXJA Forum User

RCP Phx

NAXJA Forum User

Tonybeirut

NAXJA Forum User

RCP Phx

NAXJA Forum User

Similar threads