Outer C's Question!

S

Spearfisher XJ

NAXJA Forum User

Location

SoCal/Maritime Academy

• Aug 7, 2011

• #1

Got a Currie Enterprises Hi-pinion 9 inch in the front, and was wondering what kind of outter C's I have. Thanks

 

Last edited by a moderator: Aug 9, 2011

S

Spearfisher XJ

NAXJA Forum User

Location

SoCal/Maritime Academy

• Aug 8, 2011

• #2

Anyone? I'd like to know if they are 30's, or 44's. Thanks

 

old_man

NAXJA Forum User

Location

Loveland, Colorado

• Aug 8, 2011

• #3

And why are you asking us instead of Currie?

 

X

XJWOLF

NAXJA Forum User

Location

SFV, Ca

• Aug 8, 2011

• #4

looks like Cj dana 30 knuckles. Are they unit-bearing or lock-outs? 5x4.5 or 5x5.5?

 

X

xjbubba

NAXJA Member # 1524

Location

santa barbara, ca

• Aug 8, 2011

• #5

I've read the CJ D30 outer "C'S" are very similar to the D44's. The difference being the axle tube OD; the D44 has larger axle tubes.
I saw a thread showing an XJ D30 being converted to use D44 knuckles (and all other D44 outer stuff) by installing CJ D30 inner C's on the XJ axle tube. This was possible because the XJ D30 axle tube was the same OD as the CJ D30 axle tube.

 

S

Spearfisher XJ

NAXJA Forum User

Location

SoCal/Maritime Academy

• Aug 8, 2011

• #6

XJWOLF said:

looks like Cj dana 30 knuckles. Are they unit-bearing or lock-outs? 5x4.5 or 5x5.5?

Click to expand...

Lockouts. Warn units. 5x5.5

 

X

XJWOLF

NAXJA Forum User

Location

SFV, Ca

• Aug 8, 2011

• #7

Depending on the spline count, I'd say they are CJ knuckles. Check the outer stub, if its 19 spline they're 44, if they are 27 they are CJ, and if they are 30 they are probably CJ with a conversion done. Are the lock-outs internal or external hubs? Warn made a Internal hub conversion for CJ/Scout axles.