new hampshire xj
NAXJA Forum User
- Location
- keene nh
Does anyone know the least amount of lift you need for a long arm on a 94 xj
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
LONG ARM UPGRADE
- Thread starter new hampshire xj
- Start date
playwithit
NAXJA Forum User
- Location
- Fairfield, CA
Depends on manufacturer. 4-4.5" is about the least. Not sure where the advantage of long arms are on a lift that small.
Frank Z
NAXJA Forum User
- Location
- Colorado Springs
Articulation and greatly improved ride quality....same as any other ride height.
XGarfX
NAXJA Forum User
- Location
- North Jersey
If you were only at like 2-3 inches I doubt the long arms will be anymore parallel to the ground then short arms would be.
Anything over 4 inches could benefit from long arms I'd say, although with my old short arm setup with johnny joints I could max out my front end at droop running long travel shocks and stock uppers with about 5 inches of lift.
Anything over 4 inches could benefit from long arms I'd say, although with my old short arm setup with johnny joints I could max out my front end at droop running long travel shocks and stock uppers with about 5 inches of lift.
Darky
NAXJA Forum User
- Location
- 29 Palms, CA
Drop brackets might be a better choice at a low height though. They wouldn't really hang much lower than any long kit and most kits are recommended for 4.5", probably due to arm length.