Dozer11B
NAXJA Forum User
- Location
- Ft Polk, LA
Hey guys,
First off: 96 xj 4.5 inch Rusty's with fixed aftermarket LCA's and adjustable trackbar.
Trying to figure out how to ease the angle on my drag link. Bushings at both ends are torn and the distance from the driver's side of pitman arm to the rod end is maybe less than 1/4inch.
I do need to bring the passenger side toe in some. Could this help??
Just bought a ZJ tie rod and will replace the bushings on the draglink, but I want to figure this out before I install so I don't tear up anymore bushings.
Thanks.
First off: 96 xj 4.5 inch Rusty's with fixed aftermarket LCA's and adjustable trackbar.
Trying to figure out how to ease the angle on my drag link. Bushings at both ends are torn and the distance from the driver's side of pitman arm to the rod end is maybe less than 1/4inch.
I do need to bring the passenger side toe in some. Could this help??
Just bought a ZJ tie rod and will replace the bushings on the draglink, but I want to figure this out before I install so I don't tear up anymore bushings.
Thanks.