WTS 99XJ wheeler or for parts $3500 CT

[sardo_67]

NO TIRES OR WINCH/BUMPERS!!!


some of you on the forum here may know this XJ and the previous owner. i picked this up back in November from Ryan and it needed a little bit of work, so i put Clayton ling arms on it haha. now i have a better project XJ to move onto. figure this would make a perfect start of a hard core wheeling rig or all the parts needed to bolt onto the rig you already have.

Loaded 1999 XJ with like 240k on the clock, mostly good inside does have power seat issues, custom gear locker and bottle mount in the back, well built.
XJ D44 rear 4.56 gear Aussie locker needs seals and brakes. motor is kinda tired but works fine off road and no issues with the tranny since i've had it.
D30 HP front WJ knuckles, high steer, 4.56 Aussie locker chrome shafts
TJ or YJ steering box
Rubicon 5.5 lift or whats left of it with Clayton Long arm system
NP231 with SYE
Lebarron hood vents, new battery, probably a lot im missing.

comes with 3 or 4 extra D44 shafts, stock D30 shafts, Exploder rear brakes if you want to put them on the back, also WJ rear brakes for the D44 conversion maybe, skid plate, uhhhh other stuff too.

i may want to sell the rear bumper.... ok ya, $3,500 gets you everything you see minus the front bumper/winch. i found a bone stock 98XJ with a bad motor and no rust or rot at all for damn near free that i'll be building on. only have a use for the bumper and winch since this one is gonna be Ford 9 front & rear, 4 link rear, 3 link front along with the tires on this rig.

 

[rweaver138]

previous owner discount?

 

[sardo_67]

previous owner discount?

hahaha sure, $3,000 and i'll drive it to your house. but you have to help me take off the parts i need.

oh i forgot text me, 203 592-3872

this is not a 100% decision yet but just an idea since i can get the 2nd XJ for pretty cheap since it's only worth it's weight in scrap and the $200 the customer owes my uncle.

 

[Outlander560]

if parting out how much for the rear leaf pack?

 

[ktm racer 419]

I gotta ask. Is the lightbar for sale separate? model? Price?

 

[sardo_67]

oh sorry no light bar. this is a project jeep or starter for a great wheeling rig


if you want any parts off this give me $3,500 and they come with a jeep attached

 

[sardo_67]

however i do have 80% of a rusties 4in lift kit if you want that, i posted it here.

$300 for it all, not parting it out either. that has rear leafs and what not.

 

[sardo_67]

Found another rusties lift in the shed, 2 springs and 2 leafs. 6 inch I think and am extra front drive shaft, or was it a rear.

Going to the scrap yard soon so get this while you can because I'm not storing this crap anymore. I'll just toss those in with the jeep, same with the 80% kit too.
$3500 gets you the jeep with a shit load of extra parts. I still drive this, I can drive it to your house then just remove the tires and bumper so you don't have to deal with a trailer or what not.

 

[XJLI]

That rear bumper is such a whore.

 

[billyjp2]

I have so much respect for your microsoft paint skills. well done

 

[sardo_67]

That rear bumper is such a whore.

guessing this is the 3rd jeep it's been on?

I have so much respect for your microsoft paint skills. well done

hahaha not even, i edited that shit in Photobucket after i uploaded them. also it was a touch pad on the laptop haha. i haz slillz... the USMC taught me well

 

[sardo_67]

well since i can't edit my last post i wanted to add this
flexin'


3g for a complete long arm lift, high steer set up along with gears, lockers, in built up axle all bolt in? someone wants this, tell your friends.

i have a 2000 red XJ Classic with a bad motor i am building on soon and have no use for the parts listed here. it will be a 3 link front, 4 link ford 9 rear and powered by a VW TDI diesel with about 150hp/300tq

 

[CSaddict]

Can't believe that rear bumper is still around. That is the first one I ever made!!! Good luck with your sale!

 

[XJLI]

guessing this is the 3rd jeep it's been on?

Fourth!

 

[Outlander560]

where is the bolt for the rear shackle re locator? and are that center crossmember only held on with on bolt?

 

[sardo_67]

where is the bolt for the rear shackle re locator? and are that center crossmember only held on with on bolt?

that's a weld on mount, it's welded on all sides.

 

[sardo_67]

so... any offers on this? i'll sell it complete along with 3 drive shafts, 2.5 lift kits, extra axles, seats, and everything else jeep i have on my property, even an extra ford 9 housing with 31 spline axles. cleaning out the shit and if not i'm scrapping it all.

i am 100% set on keeping the winch/front bumper combo, may sell the wheels and tires too, someone out there can get a badass lift and built axles for their jeep, anyone?

 

[Burton58]

Can't believe that rear bumper is still around. That is the first one I ever made!!! Good luck with your sale!

Fourth!

haha yup. csaddict made it, then it was mine, then XJLI, then ryans

 

[sardo_67]

hahaha well it works, although it does need a latch.

so i go down my uncles shop and see my cousin driving off with the XJ on the back to the scrap yard..... apparently the owners couldn't find the title and he didn't want to do the paperwork to get it for me. i planned on getting that XJ and already had a motor lined up for it so no idea what i'll do now. may keep this. although i really wanted a god damn rust and rot free 2000 XJ Sport to do up. ahhhhhhhh

 

[sardo_67]

ok..... i am parting SOME OF THIS out.

that track bar is off the jeep now. $150 sound good? no idea what it's really worth or cost new i just want it out of my pike of jeep crap.

the rear end will be coming up soon i think, i have to get my ford 9 shafts out to get cut down as soon as i figure out what width i need to cut it to.
what is stock XJ width now?
thinking $800 for that, with 2 or 3 extra shafts and ZJ brake parts

the front steering will be up also but as a package. offers on it?
pitman arm, both links, and both Knuckles as well. i am going over to tire rod ends so i don't need these.

may sell the entire axle as is, offer on that? not sure of value

post an offer or what you think these parts are worth, do not PM me. i also have no idea when these parts will be up for grabs, just giving a heads up

oh ya and buy my other shit too
http://naxja.org/forum/showthread.php?t=1098784
http://naxja.org/forum/showthread.php?t=1094616