After getting everything up and going, I don't think it will work with the FAL unit so easily. There's a single output, and about all I could manage without a great deal of work, is tying a relay to the outputs, and using that to switch a low amp circuit for a regular LED or lamp. That's one thing about the SPAL and DC units that eclipses the FAL. But, it works, and I've found a second leak, so fixing the system are going to take priority to further upgrading the system.
Here's the new setup.
Would have liked to use the shroud, but it wasn't going to work without a lot of trimming, and I had to have it together and running tonight. Project for another day, along with damming off the part of the fan that extends past the radiator. Project for another day #17.
Oh, and those buttonheads greatly improved the clearance. The picture sucks, but I'm not the least bit concerned about the pully and fan contacting, short of a wreck, and I'm going to try to avoid getting in one. Thanks, Don.