95YJman
NAXJA Forum User
- Location
- Fort Wayne
My Jeep won't warm up to operating temp, its had a new thermostat, water pump and the radiator tested. It still blows hot air for the heat though. So its not really affecting anything:dunno:
So its not really affecting anything
its a 92, the thermostat I put in it is a 195, I'll check out the gauge sender unit. See what I find! heh Somebody wouldn't happen to have a picture of what it looks like and its exact location would they?
Well I replaced the sensor and checked the wiring while I was at it, the wiring is good. I did also hold the heat gun to it. It is reaching operating temp so the gauge is off. With the new sensor it reads a little more better but still off heh. I may replace the T-stat. Right now I'm just gonna leave it alone it runs good, and I have heat. Thanks for the help everyone!
yep used some sealent on the threads so it wouldn't leak...
Well I replaced the sensor and checked the wiring while I was at it, the wiring is good. I did also hold the heat gun to it. It is reaching operating temp so the gauge is off. With the new sensor it reads a little more better but still off heh. I may replace the T-stat. Right now I'm just gonna leave it alone it runs good, and I have heat. Thanks for the help everyone!