Two Truckloads full of parts

[Ben H]

I need to clean out my jeep, garage and storage unit. I’ve priced this stuff to move quickly, so take advantage. The smaller stuff I can ship pretty easily, but the larger stuff will need to be picked up or dropped off, prices below do not include shipping, buyer is responsible for all shipping charges. I head through the Bay Area, Napa, Sonoma, Sacramento, Bakersfield, Central Coast about once a month, so we may be able to work out a drop off or what not. If you want to buy a lot of this stuff (bulk), I’ll come down on the price significantly. Unless otherwise stated this stuff is used and may need new bushings, some maint. or consumables. Some of this stuff is still on the jeep, and will be pulled off in the next couple of weeks unless there is interest. If you’re a homie, I’ll cut you a special special deal. I’d be willing to trade for 2” air bumps or gift certificates for Tom Woods or other stores. On the axles, if you want to buy the entire axle let me know, we’ll work something out to get these out the door. PLEASE keep posting in this thread to a minimum...There is a lot of stuff for sale and I would rather not clutter the thread up...Hit me up back channel PM or email me at [email protected]. A

All of this is coming off of a 2000 XJ, 4.0, Auto, 4 Door

1 NP231 Transfer Case, TeraLow 4:1, 2-Low, PORC SYE, Novak Shifter, With Spare Chain -$750

TJ Rubicon Dana 44, 30 Spline Inners -$200
Dana 44/30 CTMs -$100
Dana 44/30 30 Spline Outers, 30 Spline Unit Bearings -$300
Dana 30, Alloy USA Inners, Nitro 300m U Joints, 27 Spline Alloy USA Outers, 27 Spline Unit Bearings -$250
Dana 30 Ruff Stuff Diff Cover, with lube locker -$40
Dana 30 Lockright, with new set of springs -$100
Dana 30 High Pinion 4.56 gears (Spicer) with Carrier -$50
Stock Dana 30 Knuckles -Free
Dana 30 Brake Calipers -Free
Dana 30 Yoke Free
Chryco 8.25, 4.56 gears and carrier -$30
Chryco 8.25 Powertrax Locker -$100
Chryco 8.25 Ruff Stuff Diff Cover, with lube locker -$50
Chryco 8.25 ZJ Disc Brake Conversion -$100
2 Alloy USA 29 Spline 8.25 Shafts -$100
1 Yukon 29 Spline 8.25 Shaft, slighlty twisted splines (Good Spare) -$25
8.25 Yoke (2 of these) -$10
Big Offroad 4.5" HD FlexE Leafsprings (Maybe 5 runs on them) -$300
Currie XJ Anti Rock Sway bar (One run, damn near brand new) -$350
Currie Steering XJ, With Spare TREs -$200
Dodge Durango Steering Box, with Pitman Arm -$50
JKS ACOS PRO, adjustable coil spacers, with adjustable air bumps (brand new) -$700
1980's Dually Dana 70, 4.56 Gears, Open, Stock Shafts -$100
Dana 70 Disc Brake Brackets -$20
1979 Dana 44 HP 3/4 ton housing, with Ballstic XJ/TJ Brackets -$100
Right & Left Chevy Knuckles, flat top and drilled -$125
1 set of JKS Disconects (Not pretty, but work fine) -$25
Two Spare Driveshafts, 29"+/-, both same length (Off of a 2000 XJ with auto) -$25
Rubicon Express Control Arms, Lower Adjustable (slightly bent… more clearance -$50
Rough Country Control Arms, Upper Adjustable -$50
Rubicon Express Lower Control Arm Drop Brackets with braces -$75
Rusty's Belly Skid Plate -$25
Rusty's Cross Member -$25
Set of Rusty's 3.5 to 4.5" coil spings -$25
Set of RE 5.5" coil springs -$25
AJ's Offroad Square Sliders -$75
Nates Front Winch Bumper -$100
Fan Shroud -$10
Electric Fan -$10
Air box with modded snorkel that goes into cowl -Free
XJ front seats tear on driver seat side Free
Clayton Dana 30/44 axle brackets, 3 link, for highsteer (Brand New) -$300
2 Bilstein 5100 10" shocks -$25
1 set front JKS Bar Pin Eliminators -$20
1 set JKS Upper front shock mounts -$20
1 Farmboy Design Roof Halo (1st made, original prototype) -$300
A box full of misc XJ parts, shocks, interior parts, and other shit -Free
Another box full of misc XJ parts, transfer case parts, lights, and other shit -Free
One more box full of shit -Free
Jeep 4.0l late model head, a factory fix for 0331 head -$150

Thanks for looking through my digital garage sale and helping me fund my new build!

 

[tone]

PMed on the 4.56 gears for the d30/c825 and the c825 locker.

 

[Ben H]

Spoken for:


Item Description Buyer
Dana 44/30 CTMs FLOGNJK
Dana 30 Ruff Stuff Diff Cover, with lube locker Mike 1331
Dana 30 Lockright, with new set of springs Mike 1331 Possible
Dana 30 High Pinion 4.56 gears (Spicer) with Carrier Tone
Chryco 8.25, 4.56 gears and carrier Tone
Chryco 8.25 Powertrax Locker Tone
2 Alloy USA 29 Spline 8.25 Shafts DeftwillP
8.25 Yoke (2 of these) DeftwillP
Big Offroad 4.5" HD FlexE Leafsprings (Maybe 5 runs on them) Jeff Ww
Currie XJ Anti Rock Sway bar (One run, damn near brand new) Playwithit (possible)
1979 Dana 44 HP 3/4 ton housing, with Ballstic XJ/TJ Brackets Jose Jalapeno
Rough Country Control Arms, Upper Adjustable CO.XJ-01
Rusty's Belly Skid Plate Mike 1331
Electric Fan DeftwillP
Air box with modded snorkel that goes into cowl DeftwillP
2 Bilstein 5100 10" shocks DeftwillP
1 set JKS Upper front shock mounts Mike 1331

 

[DeftwillP]

I guess put me down for the bpe's too since I'll need them for the shocks, right? I've already got some of the top mounts that convert a normal shock loop to pin for xj's.

 

[wildcat-xj]

pm'ed on nates bumper

 

[kastein]

How much would shipping on those knuckles be? Think they'd fit in a $10 flat-rate box each? I'm in 01550.

 

[H8PVMT]

sent you a PM earlier

 

[vt98xj]

PMed on the 4.56 gears for the d30/c825 and the c825 locker.

If 'tone' falls thru on the 4.56 gear package (D30/c8.25) I am interested

 

[tone]

If 'tone' falls thru on the 4.56 gear package (D30/c8.25) I am interested

I'm not gonna fall through it's sold

 

[Ben H]

How much would shipping on those knuckles be? Think they'd fit in a $10 flat-rate box each? I'm in 01550.

You talking about the 44 knuckles??? Either way...Yes, flat rate box for sure.

 

[Ben H]

Got through all my messages and emails. Three days ago, I had 80+/- PMs… as of now I have 251...Fawking insane!!!

So if I haven’t responded to you, the part is spoken for or your PM was pointless. If I’ve promised you a part and sold it to somebody else…my bad. If you see a part here that you’ve sent me a pm on, send it again…I’m sure I missed a few of you.

The lockright is grenaded. I destroyed the front winch bumper pulling it off last night with my hemi.

Here is what I have left. If you see a part still for sale that I’ve promised, speak up.

1 NP231 Transfer Case, TeraLow 4:1, 2-Low, PORC SYE, Novak Shifter, With Spare Chain $750
Dana 44/30 30 Spline Outers, 30 Spline Unit Bearings $300
Dana 30, Alloy USA Inners, Nitro 300m U Joints, 27 Spline Alloy USA Outers, 27 Spline Unit Bearings $250
Chryco 8.25 ZJ Disc Brake Conversion $100
2 Alloy USA 29 Spline 8.25 Shafts $100
1 Yukon 29 Spline 8.25 Shaft, slighlty twisted splines (Good Spare) $25
Currie XJ Anti Rock Sway bar (One run, damn near brand new) $350
JKS ACOS PRO, adjustable coil spacers, with adjustable air bumps (brand new) $700
Rubicon Express Control Arms, Lower Adjustable (slightly bent… more clearance $50
Rubicon Express Lower Control Arm Drop Brackets with braces $100
Rusty's Cross Member $25
AJ's Offroad Square Sliders $75
Clayton Dana 30/44 axle brackets, 3 link, with highsteer (Brand New) $300
1 set front JKS Bar Pin Eliminators $20
1 set JKS Upper front shock mounts $20
1 Farmboy Design Roof Halo (1st made, original prototype) $300

 

[kastein]

Yup! I gotta empty my PMs...

 

[DeftwillP]

I'll take the bpe's if you hadn't seen my pm to add it to the list.

 

[Ben H]

You want those knucks? I'll eat the shipping. If you want, send me your paypal addy and a shipping address. I send you an invoice. Will ship next week.

Thanks,

Ben

Yup! I gotta empty my PMs...

 

[Ben H]

I'll take the bpe's if you hadn't seen my pm to add it to the list.

I think those are spoken for already, several people interested in them. I'll have to double check.

 

[kastein]

You want those knucks? I'll eat the shipping. If you want, send me your paypal addy and a shipping address. I send you an invoice. Will ship next week.

Thanks,

Ben

I definitely do - you don't have to eat the shipping, doesn't seem right to me. I'll send the info over.

 

[Ben H]

Here are some pictures of this stuff for those who wanted, or are buyers pending pictures. Still need to pull the Durango steering box and 4:1.


8.25 shafts look good, no spline twist

The spare 8.28 Yukon shaft, also has no twists (I thought there were)

8.25 R&P look good, so does the carrier

8.25 Powertrax looks good. Springs in bag

8.25 Ruffstuff Diff Cover

ZJ Disc brake setup for 8.25

Front Alloy shafts look good, minor wear in the contact area of the inner shaft splines but still look good. Wheel bearings are damn near brand new.

Dana 30 R&P look good, so does the carrier

Dana 30 Ruffstuff Diff Cover

RE Drop Brackets

Upper Control Arms (As previously stated…needs bushings)

Lower Control Arms (As previously stated…needs bushings)

 

[Ben H]

RE HD Trackbar (needs rubber bushing, have extra Johny Joint to go with it)

Currie Steering with extra TREs

AJ, super square rails

Farmboy designs roof halo (Thing is titties, no worries about trees anymore)

Chevy flattop knuckles

Bilstein 5125s

Durango Steering box

JKS Upper shock mounts

JKS Lower shock mounts (need to get a new set of punches to get this off the 7100s)

 

[H8PVMT]

If those are the 456 gears pm you PayPal and they are sold

 

[H8PVMT]

And the 8.25 cover, will pay + shipping, won't have acess till tomorrow