nolosses4
NAXJA Forum User
- Location
- Raleigh, NC
I took the doors off my '94 xj (two door). I looked at all the projectxj stuff and took out all the pins but one which i couldn't get out. I bought 3 6mm x 1.0 x 40mm steel/zinc plated bolts from Lowes. On the top of the bolt it says "8.8" which I assume means that it's grade 8.8. On the passenger side where i took out both pins and replaced with two bolts the door lines up perfect and there is no bending in the bolts. On the drivers side though i wasn't able to get the top pin out and i replaced the bottom pin with a bolt. This bolt bends causing the door to be out of line. I need to know if there is any other bolt/pin that is stronger than what i have. Any suggestions as to how to fix the bending, alignment or get the top pin out would be much appreciated.