I currently have the Husky Spring rebound clips on my leaf springs. If I leave them loose to allow more flex, they rattle like a bastard and slide around. If I tighten them up, they seem to limit leaf movement (the good kind). I don't want to remove the packs and have to drill and countersink a leaf on each side to use the riveted u-shaped kind. Can I bend up some u-shaped ones, drill a small hole in the center, and tack weld them to a leaf leaving the tops either open or with a bolt (or will the heat from welding the steel brittle)? I've read here that some people go completely without them, which seems somewhat unsafe to me. What do I do?
EDIT: Forgot to mention, in case it matters--they're stock leaf packs with a single, long AAL on each side just under the main leaf.
EDIT: Forgot to mention, in case it matters--they're stock leaf packs with a single, long AAL on each side just under the main leaf.
Last edited: