nrwphoto
NAXJA Forum User
- Location
- Appleton, WI
Alright, I know this is a subject covered a good number of times on here. I have searched and read most of those post including ones on other forums.
However from the various speedo gear charts floating around I have read that I need both a 38 and a 40 tooth count gear. So looking for advice, perhaps from someone with the same set up on which is more accurate. Or if I should just say screw it and shoot for the middle with a 39. Thanks.
Went from stock to, 4.10 with 30" AT (3.55 stock with 30" was reading 2 mph slow, now with 4.10 it reads 8 mph fast at GPS indicated 60 mph) Thanks
Also where is the cheapest place to get these gears? The local dealers want $80 a piece and I see them on Quadratec for $40 plus $10 shipping.
However from the various speedo gear charts floating around I have read that I need both a 38 and a 40 tooth count gear. So looking for advice, perhaps from someone with the same set up on which is more accurate. Or if I should just say screw it and shoot for the middle with a 39. Thanks.
Went from stock to, 4.10 with 30" AT (3.55 stock with 30" was reading 2 mph slow, now with 4.10 it reads 8 mph fast at GPS indicated 60 mph) Thanks
Also where is the cheapest place to get these gears? The local dealers want $80 a piece and I see them on Quadratec for $40 plus $10 shipping.
Last edited: