trouble1
NAXJA Forum User
- Location
- Charlotte, NC
I found a 88 4.0 to swap into my 88 with a shot piston. It is sitting in front of a junkyard Jeep pretty well stripped. I removed the oil pan and checked out the bearings, rods, cylinder walls, bottom of pistons etc...It all appears to be fine. The rockers and etc are clean, noil gummy buildup around anything.
It is set up for a stick, as opposed to my auto, but I assume my auto stuff will bolt right up. Is there anything I should be looking for, or gremlins I might be coming up to...
By the way, i should point out I'm not doing this in a garage, but a camground...nothing but ordinary hand tools.
Anything in particular I need to replace while doing this???
Any advice would be appreciated as I've never tried this b-4.
Thanx, Dave
It is set up for a stick, as opposed to my auto, but I assume my auto stuff will bolt right up. Is there anything I should be looking for, or gremlins I might be coming up to...
By the way, i should point out I'm not doing this in a garage, but a camground...nothing but ordinary hand tools.
Anything in particular I need to replace while doing this???
Any advice would be appreciated as I've never tried this b-4.
Thanx, Dave