hawk_sixsix
NAXJA Forum User
- Location
- L.I. New York
Searched around, haven't seen this particular issue though.
The bolt that secures the track bar to the axle - it has the flagged nut on the back. I assume this flag is attached to the nut (welded?) to keep it from spinning. I hit the nut with PB for 2 days; today I used a torch on the flag to soak heat into the nut, turned the bolt with a breaker bar slowly - no snapping - turned smoothly and steadily... but isn't backing out at all. :bs:
Plan B is to cut the bar out and punch the nut/bolt out the back, but I'm hoping there's an easier solution - or at least an explanation as to what's happening here.
The bolt that secures the track bar to the axle - it has the flagged nut on the back. I assume this flag is attached to the nut (welded?) to keep it from spinning. I hit the nut with PB for 2 days; today I used a torch on the flag to soak heat into the nut, turned the bolt with a breaker bar slowly - no snapping - turned smoothly and steadily... but isn't backing out at all. :bs:
Plan B is to cut the bar out and punch the nut/bolt out the back, but I'm hoping there's an easier solution - or at least an explanation as to what's happening here.