XJJeepin85
NAXJA Forum User
- Location
- Lebanon, PA
Ive been searching for days and nobody seems to have any solutions that i haven't already tried, I'm hoping someone can help me. So here's the deal..... I was driving along one day everything working fine then all of a sudden my rf brake started sticking, and after a few minutes started smoking. I pulled over and had it towed the rest of the way home. My first thought was a sticking caliper so I replaced both of them. Still no brakes, so my next step was a master cylinder. I put that on and what do ya know it was bad when i got it. I got another and put that in that one was good, as far as i know, but still no brakes. I just replaced the brake booster and still nothing. Now here's the part that confused me, I bench bled the master cylinder properly, and bled all the brakes many of times. They are all bleeding fine and all the fluid is clear. I still have NO BRAKES.....what do I try next??
When the jeep is off I can get pressure, but as soon as its started there is nothing at all, also it seems that the rear drums are working when the brake is pressed, but the front calipers barely move, if at all. Im going insane and also broke trying to figure this out.....any help would be great. Thanx
When the jeep is off I can get pressure, but as soon as its started there is nothing at all, also it seems that the rear drums are working when the brake is pressed, but the front calipers barely move, if at all. Im going insane and also broke trying to figure this out.....any help would be great. Thanx