flyeryan
NAXJA Forum User
- Location
- Littleton, CO
I'm trying to change the tranny fluid and filter on my '96. I've got the pan dropped (kind of), and am running into an issue. I cannot get the pan further than about 1 or 2 inches from the bottom of the tranny because it hits on the exhaust. I've removed the two nuts from the exhaust manifold, but I can't bend the tube out of the way far enough to get the pan down. I don't think dropping the cross member would help anything, would it? If I could just get the pan down far enough to scrape off the old gasket and change the filter, I'd be happy. I've already removed the bolt that holds the dipstick to the bellhousing, so that's free.
Any help? Thank you!
Any help? Thank you!