PARTING MY JEEP

[RoyalXJ]

I'm parting my jeep. I do not have time to ship. Parts must be picked up in NJ.

78 F250 HP44, flat top knuckles, RCV shafts, full spool, Warn lockouts with RCV 300m upgrades, 4:88 gears, T&T truss and bracket kit, Ruff Stuff diff cover, Spicer HD balljoints, 1330 u bolt yoke, Parts mike Hi Steer arm on passenger knuckle and custom 1.5" dom track bar w/ ruff stuff 3/4" heims and clayton track bar mount. $2600

1.50" DOM steering w/ 7/8" Ruff Stuff heims w/ Tube clamp for ram and BJs Offroad Drop Waggy pitman arm. Steering is setup for the above axle. $200

PSC Extreme Series Steering box ported for hydro assist. $350

PSC 8" 1.5" Assist Ram w/ ends $80

Rustys Steering Box Brace $20

JCR Steering box spacer $10

4.0 w/ 156k. Runs great. $350

AW4 w/ 80k $100

BBK 62mm Throttle Body. $150

Rustys Throtlle Body Spacer for 91+ $25

NP231 w/ AA SYE w/ around 15k on rebuild. $300

Novak Shifter/Linkage (non cable version) w/ Billet Knob $100

Flowmaster 50 Series 2.5" with welded turndown $20

Quigleys Custom Rear Driveshaft $200

Stock front shaft w/ new spicer 1310 u joints and spicer 1330/1310 u joint $40

JCR stage III sliders $140

ORS high cleaance stubby winch bumper $180

Roxolid rear bumper $100

HD Offroad mid stiffeners (unused) $80

XRC10 Winch w/ Synthetic line. Comes with extra new solenoid $300

Stock XJ hd has tank skid $50

5- 37x12.50x15 Goodyear MTRs. 2 have 70% 1 is 50% 1 is 35% and spare is 15%. Still great on the rocks. $350

2- Bilstein 12" Shortbody 7100s (255/70) w/ JKS top adapters $200

2- Bilstein 10" 5100s (255/70) 2 months old. $100

Clayton 6.5" coils $110

2- US Made Rubicon Express 4.5" Leafs $150

Rubicon Express 1.25" Shackles $50

Ruff Stuff traction bar (2" dom lower, 1.5" dom upper, 4" shackle, 7/8 heim) Needs axle plates. $100

BDS 4 Link Longarm Kit with Transfer Case skid $600

 

[John__505]

I will take the Flowmaster if you part Bob

 

[RoyalXJ]

definitely parting. sold the rear axle to cj today.

 

[HQuakers]

PM Sent

 

[Crewdude007]

I'll take the longarm kit and springs! PM sent

 

[chedisme]

your 44 is still full with right? so the steering should fit a SRW d60 out of the same year truck? Itf I have the high steer arm ofcourse

if so I might be interested in the steering, box and ram.

 

[RoyalXJ]

longarms are sold
7100s are sold
coils are pending

 

[RoyalXJ]

your 44 is still full with right? so the steering should fit a SRW d60 out of the same year truck?

yep still fullwidth. im not totally sure if it would be the same width

 

[chedisme]

alright Im going to measure mine tomorrow and ill get back to you. just to clarify on your setup, your drag link goes to the high steer arm and the tie rod goes from the stock position on the knuckles.

 

[RoyalXJ]

yeah tie rod goes knuckle to knuckle and draglink goes to the hi steer arm

 

[IROCthe4.0]

Nevermind

 

[RoyalXJ]

 

[bert01xj]

So what are you doing with the body motor and tranny?

 

[lilnapsak]

i could use the black plastic thing above the license plate on the hatch, dash bezle(goes around gauges, light switch ect), light switch, clock spring and blinker switch

 

[RoyalXJ]

So what are you doing with the body motor and tranny?

Body is pretty beat up. I'm gonna take it to the scrap yard to see what they will give me. Motor is suppose to be picked up on Sunday. Trans is still around and for sale.

 

[bert01xj]

I pm'd you. Let me know how much you get at the scrap yard that's were the wife's is heading once I get it parted.

 

[rweaver138]

Damn, I'd like the gas tank skid and leaves but not sure how I'd get em

 

[GreenMachine1]

PM sent

 

[katdemar]

Sent a PM with my contact info.

 

[RoyalXJ]

i could use the black plastic thing above the license plate on the hatch, dash bezle(goes around gauges, light switch ect), light switch, clock spring and blinker switch

plastic piece on back is broken. i still have the bezel and switches. lemme know.