OK Here are some pictures I took with the jeep off. Sorry so many but I want to show everyone what I am seeing.
Passenger Terminal:
Drivers Terminal:
Voltage on Drivers Terminal using both the right and left sides.(LOW BEAMS-Multiple Pics)
Voltage on Passenger Terminal using both the right and left sides.(LOW BEAMS-Multiple Pics)
Voltage on Drivers Terminal using both the right and left sides.(HIGH BEAMS-Multiple Pics)
Voltage on Passenger Terminal using both the right and left sides.(HIGH BEAMS-Multiple Pics)
Now one thing I did notice is that the filament on the low beams compared to the 2 looked different. The filament twords the front is on both lights when low beams are on. However the filament twords the rear also lights up a little on the dim (passenger side). I swapped bulbs side to side and also bought new ones. Same outcome. Brights between the 2 sides looked the same no different. You might be able to see what I mean in these pics.
Passenger Side
Drivers Side:
Then I checked for resistance using the battery and the ground from the light connector. Nothing at all, no resistance.
As I was doing all these tests I did find this, but if I am getting the correct amount of power then it shouldn't matter, unless the wires are backwards or something??
I AM TOTALLY STUMPED HERE!!! Everything points to the bulbs but it isn't??????