idahoskier
NAXJA Forum User
- Location
- Idaho
First, I have used the search. So I just did the head gasket on my 96 4.0 manual trans 4x4. Now my temp gauge pegs as soon as the ign is on, cold engine. Ive grounded the wire and the gauge responds correctly. When I plug the sender into the wire, but not threaded into the block the gauge reads correctly=cold. As soon as the sender touches the block it pegs the gauge. So Im getting a ground out condition when the sender touches the block?! My ground strap, right next to the sender, is tight. Im sure this is simple but what am I missing? Thanks!