bradleyheathhays
NAXJA Forum User
- Location
- Lexington, KY
Been reading up on replacing my headliner and a good tip seems to be to coat your fiberglass head liner board with one coat of fiberglass epoxy 24 hr before applying spray adhesive as that will make the adhesion much better.
I'm unfamiliar with fiberglass epoxy so I'm wondering exactly what product they're talking about. Can anybody link me to an example so I'll know what to look for?
Also, for adhesive I've been told to avoid the 3M 77 and get the 3M high temp type spray adhesive but that's the best description I've found. Would this be it?...
3M Hi Strength 90 Heavy Duty Spray Adhesive, 17.6 oz...
http://www.amazon.com/3M-90-24-Spray-Adhesive-17-6-Ounce/dp/B0002BBV2S
Thanks
I'm unfamiliar with fiberglass epoxy so I'm wondering exactly what product they're talking about. Can anybody link me to an example so I'll know what to look for?
Also, for adhesive I've been told to avoid the 3M 77 and get the 3M high temp type spray adhesive but that's the best description I've found. Would this be it?...
3M Hi Strength 90 Heavy Duty Spray Adhesive, 17.6 oz...
http://www.amazon.com/3M-90-24-Spray-Adhesive-17-6-Ounce/dp/B0002BBV2S
Thanks