whyt
NAXJA Forum User
- Location
- Bakersfield Desert
Need a driveshaft and the rear yoke for a 90 2 wheel drive automatic XJ. Or recommend a place to go pick a part from in the Springs.
thanks
thanks
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Need drive shaft or recommend pick a part
- Thread starter whyt
- Start date
Frank Z
NAXJA Forum User
- Location
- Colorado Springs
UPull-n-Pay (Formerly A-1 Used Parts) on Highway 85/87 just north of Security.
YELLAHEEP
NAXJA Forum User
- Location
- Littleton, Colorado
Yeah, that 2wd stuff is gonna be a little difficult. I'll keep my eye out.
When you say "rear yoke" are you talking about the pinion yoke on the differential? If so, we need to know what axle you have (D35, 8.25?) That part should be the same regardless of 2/4 wheel drive.
When you say "rear yoke" are you talking about the pinion yoke on the differential? If so, we need to know what axle you have (D35, 8.25?) That part should be the same regardless of 2/4 wheel drive.
- Location
- Golden, CO
Since I have yet to see a self-serve yard with a straight rear shaft, you might be looking for a driveline shop also.
All the yards up here pick up the cars with big forklift. They booger up the rear shaft before the wheels are off the ground.
I've picked up good parts attached to a wasted shaft for very little $$$. That is all I dare to hope from these places.
All the yards up here pick up the cars with big forklift. They booger up the rear shaft before the wheels are off the ground.
I've picked up good parts attached to a wasted shaft for very little $$$. That is all I dare to hope from these places.
