fizassist
NAXJA Member #1052
- Location
- Los Alamos, NM
Hi Folks,
I'm regearing my D30 and see that I had no pinion depth shims originally. From the pinion, it was slinger, inner bearing, inner race, baffle, diff case. No shimming at all inside the case. I did have preload shims on the outside part of the pinion. Is this odd?
Thanks,
Ben
I'm regearing my D30 and see that I had no pinion depth shims originally. From the pinion, it was slinger, inner bearing, inner race, baffle, diff case. No shimming at all inside the case. I did have preload shims on the outside part of the pinion. Is this odd?
Thanks,
Ben