So I installed my brown dog motor mounts and I have very bad vibrations on DS compared to PS. My DS rearview shakes so hard it is blurry.
I have tried loosening the through bolts a quarter turn twice now. One of the washers spins freely per instructions.
My main question is about how the MM should sit against the bracket. There seems to be a lip on the bracket, should the rubber ring on outside of my mount sit flush in that bracket? See picture
I have tried loosening the through bolts a quarter turn twice now. One of the washers spins freely per instructions.
My main question is about how the MM should sit against the bracket. There seems to be a lip on the bracket, should the rubber ring on outside of my mount sit flush in that bracket? See picture