Local Rig Directory

[GlueNTape]

Yeah after the bushwackers didnt work i had to big of cut outs to mess around with the stock ones, plus i think i already got rid of them. But these are just some rubber flares i ordered from jeep essentials for like 50 bucks. They did the trick to satisfy the police. They come with self tapping screws you just screw into the under side of the fender well. For the fronts i just made some notchs in the fender and folded them inside so i had someway to screw them on.

Very cool, I am gonna half to check em out. I need to do a little PO PO proofing myself.

 

[92xjkid]

Nope, was just hopin you had a better more exotic reason. Imported from GB, or Aus...

Its your jeep.

haha a right hand drive jeep would give me a total diffrent trail experience.

 

[88manche]

I thought it was a RHD jeep in the pic of the two by each other. it would make sence that way, since the tire would be behind the driver and not blocking as much of the view out the rear window than a LHD jeep swing away with the tire on the left side.

 

[wade_hack]

Here's my bucket of bolts. Of course it not even close to being done yet.

1986 xj 2.8 V-6, 5 speed manual, 207 t-case,dana 30 and 35, 4.11 gears. Front springs are 4.5. The rear only has 2" blocks. It came that way.
I cut the fenders front and rear. I installed 33x12.5x15 BFG MT tires. I built a rear bumper and rock slides. The front bumper build starts this weekend and the roof rack after that.
These parts are waiting to be installed
I have a set of 6.5 front springs I'm installing in the front with a 1" spacer. I also have a set of IronMan adjustable upper and lower arms, Rustys adjustable track bar, drop bracket, and frame stiffener. Rustys tie rod conversion, and extended brake lines.
The rear will be Rustys 4.5 springs, IronMans adjustable shackles. and an extended brake line.
Gears will be 4.88 with E-Lockers front and rear
This is how it looks so far.

http://i788.photobucket.com/albums/yy164/wade_hack/000_0004.jpg
http://i788.photobucket.com/albums/yy164/wade_hack/000_0005.jpg
http://i788.photobucket.com/albums/yy164/wade_hack/000_0013.jpg
http://i788.photobucket.com/albums/yy164/wade_hack/000_0010.jpg
http://i788.photobucket.com/albums/yy164/wade_hack/000_0017.jpg
http://i788.photobucket.com/albums/yy164/wade_hack/000_0033.jpg
http://i788.photobucket.com/albums/yy164/wade_hack/000_0038.jpg
http://i788.photobucket.com/albums/yy164/wade_hack/000_0037.jpg
http://i788.photobucket.com/albums/yy164/wade_hack/000_0001_0001-1.jpg
http://i788.photobucket.com/albums/yy164/wade_hack/000_0009-2.jpg
http://i788.photobucket.com/albums/yy164/wade_hack/000_0006-1.jpg
http://i788.photobucket.com/albums/yy164/wade_hack/000_0008-2.jpg
http://i788.photobucket.com/albums/yy164/wade_hack/000_0005-2.jpg

 

[harleydrifter]

don't have photos to post yet 88 4dr 6.5 lift currently 3.55s have 4.11s w/rear det. locker ready to put in next week if the snow is gone 33s bfgs cad kit real nice clean $200 craigslist special lynden wa.

 

[XJCasper]

don't have photos to post yet 88 4dr 6.5 lift currently 3.55s have 4.11s w/rear det. locker ready to put in next week if the snow is gone 33s bfgs cad kit real nice clean $200 craigslist special lynden wa.

$200? this a whole jeep?

 

[WROTHDONKEY]

Chris
Provo Utah

2001 with 3 inch skyjacker and American racing rims wrapped with 31" BFG AT

Hosted my pictures from tiny pics dot com

 

[TORX]

Clean XJ!

You may however want to check in with the Intermountain Chapter. They're a little more local for you. :thumbup:

 

[88manche]

Just a little.

and no tread lightly comment! haha.

Whereabouts is that?

 

[fishjeep]

New to Xj's -(picture in profile album) 99 XJ with RE 3.5 lift warn front bumper and 8k warn winch with masterpull synthetic winch rope. Going with a Clayton long arm upgrade soon with RER 5.5 coils in front and JKs Lift Shackles in the back. JCR stage 2 bumper and jcr rear lower panel armor.

 

[Shane_92-XJ]

eace:

Shane

 

[RubiconKid95]

and no tread lightly comment! haha.

Whereabouts is that?

What?

 

[BCCHEROKEE]

Chris
Provo Utah

2001 with 3 inch skyjacker and American racing rims wrapped with 31" BFG AT - (pix removed to quote!)
Hosted my pictures from tiny pics dot com

What is the color code for that yellow on your XJ..
- Year, make and model..

tks..

 

[seymore]

these are from memial day weekend '09. running 32 bfg m/t's with 3" lift (and some fender trimming ) aussie up front. currently a dana 35 in rear but here with in the month the 8.25 should be going in with a powertrax in it.

 

[crazycracka]

Hey guys. Just realized I haven't posted in here yet.. I have a 90 that I bought from the original owner about 6 months ago with 150k miles and Great records. So far we have done the following: 4 inch Home brew lift, CA drop brackets, Craggar soft 8's, 31" Wildcat ext's, Flowtech exhaust.. Right now we are working on Home brew Sliders, frame stiffeners, bumpers, and EMT rack. Here are some pictures..

Day we bought it..

After installing the lift..

Now how it looks yesterday (today we painted all trim black)

 

[Smittty9785]

west linn right across the river from oregon city hbu

SE eastport plaza area

 

[phmaris]

Tacoma (Gig Harbor). Just relocated from Chicago.

Here is my 1999 XJ with 3.5 RE Superflex and 31inch GY Duratracs. Still lots more to do..

I just washed and waxed her after the 2k road trip. Not usually this clean!

 

[kndrewa]

Tacoma (Gig Harbor). Just relocated from Chicago.

i never saw you when i was in chicago!

you ever do a winterfest?

or hang with the GLJT?

well anyways, howdy!

 

[thethinginthewoods]

Tacoma (Gig Harbor). Just relocated from Chicago.

Here is my 1999 XJ with 3.5 RE Superflex and 31inch GY Duratracs. Still lots more to do..

I just washed and waxed her after the 2k road trip. Not usually this clean!

Hella clean rig.

 

[Feva]

Hey guys. Just realized I haven't posted in here yet.. I have a 90 that I bought from the original owner about 6 months ago with 150k miles and Great records. So far we have done the following: 4 inch Home brew lift, CA drop brackets, Craggar soft 8's, 31" Wildcat ext's, Flowtech exhaust.. Right now we are working on Home brew Sliders, frame stiffeners, bumpers, and EMT rack. Here are some pictures..


Now how it looks yesterday (today we painted all trim black)

Looking good!