I have read how others have installed after market fog lights using the factory switch and I have the diagrams but I need some additional help.
Below is the link to the Light Force wiring harness....notice the black/red and brown wires that go to the switch. The brown wire goes from the switch to high beam wire (orange not red...which I have to fix later) on the headlight. I (think I) understand that this is supposed to interrupt the lights from being on when the high beams are selected.
http://www.lightforce.net.au/files/pdfs/Wiring_Harness.pdf
Step 9 below calls the terminals on the switch "left and right", unfortunately that is were I am lost.
---9. Strip 5mm off the ends of the insulation of the brown wire and black with red stripe wire, then crimp a red terminal to each
end, connect to left and right terminals on the switch.---
When using the factory switch the terminals are:
1. Orange - Fused panel lamps dimmer switch (Check)
2. Light Blue - Flog lamp switch out (Black/red...maybe???)
3. Violet - Fog lamp relay (can this be ANY 12v source???)
4. Black - Ground (to the vehicle or battery???)
I could just use the crappy switch that came with the kit and be done but...that is just to easy. Thanks for the help and sorry there are no pictures.
Will
Below is the link to the Light Force wiring harness....notice the black/red and brown wires that go to the switch. The brown wire goes from the switch to high beam wire (orange not red...which I have to fix later) on the headlight. I (think I) understand that this is supposed to interrupt the lights from being on when the high beams are selected.
http://www.lightforce.net.au/files/pdfs/Wiring_Harness.pdf
Step 9 below calls the terminals on the switch "left and right", unfortunately that is were I am lost.
---9. Strip 5mm off the ends of the insulation of the brown wire and black with red stripe wire, then crimp a red terminal to each
end, connect to left and right terminals on the switch.---
When using the factory switch the terminals are:
1. Orange - Fused panel lamps dimmer switch (Check)
2. Light Blue - Flog lamp switch out (Black/red...maybe???)
3. Violet - Fog lamp relay (can this be ANY 12v source???)
4. Black - Ground (to the vehicle or battery???)
I could just use the crappy switch that came with the kit and be done but...that is just to easy. Thanks for the help and sorry there are no pictures.
Will