xjguy98
NAXJA Forum User
- Location
- Belleville, Ontario
Was on my way to work this morning when I noticed the Jeep was idling a bit rough and almost immediately after I noticed it, my check engine light came on. Gauges all looked good and it "seemed" normal so I kept going to work. Came home and called the parts store and brought it in to get the codes read. They came up with three codes:
P0700 - EATX Controller DTC Present
P0705 - Absolutely no idea as it doesn't show up in the DTC list in the FSM
P0463 - Fuel Level Sending Unit Volts Too High
I can sorta figure out P0463 as I'm gonna go out and meter the wiring and see what the problem is and if it can be fixed but as far as the other two go, how do I find out what's going on? The FSM isn't exactly helpful for these two codes.
P0700 - EATX Controller DTC Present
P0705 - Absolutely no idea as it doesn't show up in the DTC list in the FSM
P0463 - Fuel Level Sending Unit Volts Too High
I can sorta figure out P0463 as I'm gonna go out and meter the wiring and see what the problem is and if it can be fixed but as far as the other two go, how do I find out what's going on? The FSM isn't exactly helpful for these two codes.