ok i am trying to develop my list of parts for the build. from Jeep4.0proformance i want to build the 4.6 Poor mans stroker. with the exception of i'm adding a turbo. so below i am listing just the stroker build list. once i get it in the jeep and broke in then i'm adding the turbo. plus it gives me a chance to build up my cash again.
parts needed
Jeep 4.2L 3.895" stroke crank
Jeep 4.0L 6.125" rods
ICON Performance Pistons IC944-020
Mopar 0.043" head gasket
Accel 24lb/hr injectors
all other gaskets
cloyes roller timing chain
rocker arms
pushrods
stock cam
other work
Ported HO 1.91"/1.50" cylinder head i'm sending out
now that site claims that i will be fine using the stock cam but is that ideal?
i was looking at 505s hydraulic cams to bring the torque to the low end before spooling. any thoughts. plus their cams come with push roads timing set and springs
please help me get my list perfect
parts needed
Jeep 4.2L 3.895" stroke crank
Jeep 4.0L 6.125" rods
ICON Performance Pistons IC944-020
Mopar 0.043" head gasket
Accel 24lb/hr injectors
all other gaskets
cloyes roller timing chain
rocker arms
pushrods
stock cam
other work
Ported HO 1.91"/1.50" cylinder head i'm sending out
now that site claims that i will be fine using the stock cam but is that ideal?
i was looking at 505s hydraulic cams to bring the torque to the low end before spooling. any thoughts. plus their cams come with push roads timing set and springs
please help me get my list perfect