supark
NAXJA Forum User
- Location
- San Francisco
Some background - my 96 cherokee country has factory power locks and keyless entry (infrared).
Decided to install a DEI 712t keyless entry system and am feeling out of my element. Hopefully you guys can help. Here's what I thought I was supposed to do:
Power: Red wire on ignition harness - check
Ground: easy - just grounded on bolt connecting to bare unpainted metal
Unlock: Pink w/purple stripe wire running from door lock control harness under driver side kick panel. Connected to "unlock common output" wire on DEI keyless entry harness
Lock: Orange w/purple stripe from same door control harness. Connected to "lock common output" wire on keyless entry harness.
I'm getting power to the keyless entry system, but it's not actuating the locks. I can't figure it out - what am I missing? Below is the wiring harness wire out descriptions if that helps. Right now I'm not as concerned about wiring up the ancillary functions like beeping the horn and such - just want to get the unlock/lock function working. Thanks in advance!
Red: (+) constant power input
Blue: (-) 200 mA second unlock output
Black/White-1: input of domelight supervision relay #87
Black/White: Output of domelight superviison relay #30
Green/Black: Lock #30 common output
White/Black: Lock #87 Normally closed
Violet/Black: Lock #87 Normally open (input)
Blue/Black: unlock #30 common (output)
Violet: Unlock #87 normally open (input)
White: (+/-) Parking light flash output
Black: (-) Chassis ground input
Brown: (-) Horn honk output
Light Green/Black: factory alarm disarm
White/Blue: (-) 200mA Channel 3 validity output
Yellow: (+) Switched igition input
Orange: (-) 500 mA ground-when-armed output
Brown/Black: Unlock #87a normally closed
Red/White: (-) output of channel 2
Decided to install a DEI 712t keyless entry system and am feeling out of my element. Hopefully you guys can help. Here's what I thought I was supposed to do:
Power: Red wire on ignition harness - check
Ground: easy - just grounded on bolt connecting to bare unpainted metal
Unlock: Pink w/purple stripe wire running from door lock control harness under driver side kick panel. Connected to "unlock common output" wire on DEI keyless entry harness
Lock: Orange w/purple stripe from same door control harness. Connected to "lock common output" wire on keyless entry harness.
I'm getting power to the keyless entry system, but it's not actuating the locks. I can't figure it out - what am I missing? Below is the wiring harness wire out descriptions if that helps. Right now I'm not as concerned about wiring up the ancillary functions like beeping the horn and such - just want to get the unlock/lock function working. Thanks in advance!
Red: (+) constant power input
Blue: (-) 200 mA second unlock output
Black/White-1: input of domelight supervision relay #87
Black/White: Output of domelight superviison relay #30
Green/Black: Lock #30 common output
White/Black: Lock #87 Normally closed
Violet/Black: Lock #87 Normally open (input)
Blue/Black: unlock #30 common (output)
Violet: Unlock #87 normally open (input)
White: (+/-) Parking light flash output
Black: (-) Chassis ground input
Brown: (-) Horn honk output
Light Green/Black: factory alarm disarm
White/Blue: (-) 200mA Channel 3 validity output
Yellow: (+) Switched igition input
Orange: (-) 500 mA ground-when-armed output
Brown/Black: Unlock #87a normally closed
Red/White: (-) output of channel 2