StylerG
NAXJA Forum User
- Location
- Oklahoma City
D30, 4.56, Cryo Treated so im trying to get them setup tight like i was told to from Bobby Long.
Pinion shims are around .42 (my drink spilled on my notes so thats from memory)
Pinion Pre-load around 18in pounds
Backlash .004
Carrier pre-load is good, no side to side movement and tight
Drive Side
Sorry for the crappy cell phone pics thats the only camera i have. You can see the contact patch best on the tooth above where i have the compound in the light my cell phone provided.
Coast Side
Like i said, shooting for a tight setup. Only thing that my eyes see is i could use a tad more shim on the pinion to bring it in to the tooth a bit more.
Pinion shims are around .42 (my drink spilled on my notes so thats from memory)
Pinion Pre-load around 18in pounds
Backlash .004
Carrier pre-load is good, no side to side movement and tight
Drive Side
Sorry for the crappy cell phone pics thats the only camera i have. You can see the contact patch best on the tooth above where i have the compound in the light my cell phone provided.
Coast Side
Like i said, shooting for a tight setup. Only thing that my eyes see is i could use a tad more shim on the pinion to bring it in to the tooth a bit more.