Feeler: 14 Forged Chromoly Ballistic Joints and Currie Johnny Joints, 1.25 and 7/8

[freerider15]

Putting a feeler out for these, to gauge interest.

Looking to possible move to heims on my buggy, though I would have no fear or qualms running them on the buggy.

These joints are still new and unused, other than having just sat in the links while I've been building the rig.

This is enough joints to do a 3-link front, 4-link rear, and a trackbar/panhard.

What I have:

Four of the following (4 LH thread):

Forged Chromoly 2.63" Ballistic Joint
Bearing thru hole: 5/8''
Stud diameter / Thread Pitch: 1.25''- 12 tpi

Four of the following (4 RH thread)

Currie 2.63" Forged Johnny Joint
Bearing thru hole: 9/16"
Stud diameter / Thread Pitch: 1.25''- 12 tpi

Eight of the following (4 LH and 4 RH thread)

Forged Chromoly 2.63" Ballistic Joint
Bearing thru hole: 5/8''
Stud diameter / Thread Pitch: 7/8" - 14 tpi

Ballistic has the 1.25 and 7/8 shank Joints for $59.99 currently, and the Currie's are $44.95.

$45 per Ballistic Joint, $35 per Currie Joint.

So for the whole lot:

$540 for the Ballistics, $140 for the Currie's which comes to $680 total.

I would prefer to have all the joints accounted for to be sold before letting them go.

I'll wrap them and flat rate ship them to wherever.

 

[freerider15]

Currie Joints are pending sale.

Ballistic Joints are still available, but I'm adding in the jam nuts so $50 each.

So that's ~$10 per joint saving after the normal Ballistic discount...and flat rate shipping saves more (Ballistic's shipping isn't the cheapest)

 

[jdxj]

I might take the ballistics if I can gather up the funds! Crane-guys got all if my disposable income this month! I'll let ya know if I can gather it up!

 

[freerider15]

I might take the ballistics if I can gather up the funds! Crane-guys got all if my disposable income this month! I'll let ya know if I can gather it up!

Ha no worries JD, i'll let you know if I still have them if you end up wanting any of them.

 

[freerider15]

Adding a picture:

They're a little dirty in the picture.

 

[eflores]

what we talked about plz

 

[freerider15]

That was:

2 of the 1.25's, and 4 of the 7/8's (2LH and 2RH) correct?

 

[eflores]

eff idk...now you gotta make me think

 

[freerider15]

eff idk...now you gotta make me think

Better hurry up...already got people PM'ing me!

I'll be headed through Denver on the way to Grand Lake this Friday morning/afternoon and returning Sunday if you can get anyone to take them for ya.

 

[freerider15]

Forgot to update due to Currie's sold and the Jam Nuts now going with the Ballistic Joints:

These joints are still new and unused, other than having just sat in the links while I was been building the rig, located in Fort Collins, CO.

What I have:

Four of the following (4 LH thread):

Forged Chromoly 2.63" Ballistic Joint
Bearing thru hole: 5/8''
Stud diameter / Thread Pitch: 1.25''- 12 tpi

Eight of the following (4 LH and 4 RH thread)

Forged Chromoly 2.63" Ballistic Joint
Bearing thru hole: 5/8''
Stud diameter / Thread Pitch: 7/8" - 14 tpi

Ballistic has the 1.25 and 7/8 shank Joints for $59.99 currently (not counting Jam nuts).

$100 per Ballistic Joint w/ Jam Nut pair, don't really want to sell in less than pairs.

I'll wrap them and flat rate ship them to wherever so shipping would be cheap.

 

[freerider15]

BTT

 

[freerider15]

BTT

 

[freerider15]

Sale pending on joints.