O-Gauge Steamer
NAXJA Forum User
- Location
- Colorado Springs, Colorado
So, I snagged a pair of them from the local JY ($33 for both) and have a question as to the wiring. Everything I have read says three wires (check) one is the Ground (check again) one for high speed (uh, no) and the other for low speed (again, no). Interestingly, both the left and right fans are two speed. Most accounts say that only one is two speed, the other single.
What these fans have are as follows:
The black lead is ground. Either of the two leads (red w/ orange tracer, grey w/ red tracer) will give low speed. It is only when both leads are powered do you get high speed.
Anyone out there that can confirm the Ford wiring? I have been just amazingly unsuccessful in finding a schematic online.
What these fans have are as follows:
The black lead is ground. Either of the two leads (red w/ orange tracer, grey w/ red tracer) will give low speed. It is only when both leads are powered do you get high speed.
Anyone out there that can confirm the Ford wiring? I have been just amazingly unsuccessful in finding a schematic online.