Muddy Beast
NAXJA Forum User
- Location
- WA
I received my long arm upgrade kit from Clayton's today and have been looking over the directions for install, I have a quick question. I was hoping someone with a similar set-up to mine can give me measurements (center of bolts to center of bolt) on the lower and upper arms on both sides of their Clayton's.
I'm running RE 4.5 coils with RE 1.75" spacers, my guess is after sag I'll be sitting around 5-5.5".
Anyone with Clayton's which are adjusted properly feel free to post your Clayton's arm lengths. I figure in the future people can use this thread to compare their measurements and their set-ups, just remember POST WHAT YOUR RIGS LIFT IS! (Obviously, the lift makes a difference with the measurements)
~Scott
I'm running RE 4.5 coils with RE 1.75" spacers, my guess is after sag I'll be sitting around 5-5.5".
Anyone with Clayton's which are adjusted properly feel free to post your Clayton's arm lengths. I figure in the future people can use this thread to compare their measurements and their set-ups, just remember POST WHAT YOUR RIGS LIFT IS! (Obviously, the lift makes a difference with the measurements)
~Scott