Stukboy
NAXJA Forum User
- Location
- Lancaster, PA
I have a built 44 from a Waggy (4.88s, alloy shafts, warn hubs, locker, u-bolt yoke) the only thing it is missing is flat top knuclkes.
I found some on Ebay and am asking if these will work for my application.
They are from a Dodge Dana 44 W200 truck. They have the six bolts for the spindles but it appears that the bolts are slightly clocked forward.
My next question was will all my Waggy stuff bolt up? ie, spindles, calipers,. rotors.
I'm not worried about the drilling and tapping or the rod ends or tubing, just if these are a straight swap in place of my current knuckles.
This is for a trail only XJ.
Thanx for the input,
Stukboy
I found some on Ebay and am asking if these will work for my application.
They are from a Dodge Dana 44 W200 truck. They have the six bolts for the spindles but it appears that the bolts are slightly clocked forward.
My next question was will all my Waggy stuff bolt up? ie, spindles, calipers,. rotors.
I'm not worried about the drilling and tapping or the rod ends or tubing, just if these are a straight swap in place of my current knuckles.
This is for a trail only XJ.
Thanx for the input,
Stukboy