jeepxj89
NAXJA Forum User
- Location
- langley,B.C
what are you guys using for rear cv driveshafts after installing an sye, other than the ones bought from driveline shops . anyone using bronco or explorer shafts? xj front shafts? how do they work and would you recommend a shortened/lengethend shaft from another vehicle over a new shaft all together? the jeep it will be going into is a 91 4L with an ax-15 and an np231 with and 87 xj dana 44 rear on 6.5 - 7 inches of lift. any responses appreciated!