Sillyfast
NAXJA Forum User
- Location
- Lansing, MI
So I went all chop out crazy and that led to ripping the factory dash out and building a custom one. Its pretty much done. I chopped up the factory gauges so they are flush mount and everything works except the illumination lights and the light I hooked up for the check engine light. I checked fuses, checked the grounds and wired the CEL buy tracing the stock lights lines (black with red stripe and white with orange line) but those doubled up with a couple other wires so I don't know if that's right. I also tried each of those lines with a ground to the chassis and that did not work either. As far as the gauge illumination lights, worst case scenario I hard wire them up and put them on a switch.
While testing I did not have any of the HVAC controls hooked up and I don't know if that has any effect. I also do not have any of the factory stereo wires hooked up.
Picture so this thread isn't anymore boring
While testing I did not have any of the HVAC controls hooked up and I don't know if that has any effect. I also do not have any of the factory stereo wires hooked up.
Picture so this thread isn't anymore boring