Black_Beastie
NAXJA Forum User
- Location
- West Georgia
I am undertaking a massive cut project on my 96' XJ sport. I am cutting out the rear hatch to make a short bed and also doing half doors on the front. (This is not the massive cut that i am refering to) My xj has significant rust and rot through out the entire unibody, the only part that is not horribly rusted is the unibody portion of the "frame" that supports the motor just before the lower control arm.
I am not worried about how i am going to do the body modifications there are plenty of posts and other guys and gals on here who have done what i am planning, what i need to know is the exact specs of the uniboby rails from bumper to bumper so that i can make my own and cut out all of the existing junk that has been consumed but the rust. I will be welding together the new "rails" and doing a full rust cut restoration.
:skull1:Just a quick disclaimer: Any posts that say this cannot be done or scrap it will be ignored. I am only looking for positive posts that help me in my undertaking. I refuse to send an xj to the graveyard.:skull1:
I am not worried about how i am going to do the body modifications there are plenty of posts and other guys and gals on here who have done what i am planning, what i need to know is the exact specs of the uniboby rails from bumper to bumper so that i can make my own and cut out all of the existing junk that has been consumed but the rust. I will be welding together the new "rails" and doing a full rust cut restoration.
:skull1:Just a quick disclaimer: Any posts that say this cannot be done or scrap it will be ignored. I am only looking for positive posts that help me in my undertaking. I refuse to send an xj to the graveyard.:skull1: