- Location
- Colorado
I’ve used the claw one and the slide hammer with success
Not mine but they were HF
For what ever that is worth
Not mine but they were HF
For what ever that is worth
Well I shared them to the Naxja Facebook page ... shall see if they're viewable .
Can’t find em
anyone know if the cheap H/F style bearing pullers are worth a damn on a carrier?
im torn between cutting old ones off/ buying new bearings to make some set ups and pulling the current and using those.
They appear to be there when I look on the front page ?
The content was recorded on Danny's phone posted to Danny's face book aka...Chinakee... he has not sent me the video so I can't post it independently, so most likely that means you need to friend Danny to view the video content... He also forgot to record me going up which was actually pretty easy for it raining ...lol... if it can be crawled raining it's going to be insanely easy when not ....anywho on our way back down I had become accustomed to just holding my soggy brakes to the floor waiting for them to actually do something, well coming off a 6-7 7ft sheer drop that practice immediately had my rear end coming up to try and pass my front...ended up using the stinger and the gas pedal as soon as I realized what I was doing by accident with the brake ... stood that bitch right up and down like 6'° clock ... struts do make for a damn Smooth landing.
I haven't been on here is a while, fact haven't been wheeling or doing anything cool for while.
Where did everyone go?
Fellow driver told me that masks are law and as a law abiding citizen I shouldn't question being forced to don the mask. I said if you feel you need to wear a mask for your safety you should be able to but if you don't feel that way it should be personal choice. I pointed out a face covering in all states that require one could be a piece of toilet paper draped over your face held on with tape and most people wearing masks are nothing more than a bandanna so the actually effectiveness of this can't be very much.
I asked this driver if they upped it tomorrow mandating you now wear the mask , gloves, goggles, and face shield would you be wilfully compliant his answer was " yes sir" he then told me his covid story of being sick for 4 weeks I told him antibody testing says I had it as well , but wouldn't recall my experience as life threatening.
This driver is a morbidly obese sack of pudding who is out of breath walking 20ft ...after his mask and covid guilt trip proceeds to start lighting up his cigarette to which he smoked 5 in the hour he was there .
These are the people who make me roll over laughing with the covid mask wearing safety guilt trip... I don't wear a mask unless I can't get out of doing so ... but here you have a guy telling me covid kills and he wears a mask ... yet he has no problem staying morbidly obese and a heavy smoker . I do have a mask I made out of an old sack from some Oranges ...I fully plan to wear it since it is as legitanemt as a bandanna face covering .
Just curious if anyone has ever replaced a flex plate successfully without lowering the trans/case and were able to get enough room by just sliding it back . Not sure if there is enough room to slip everything back and get to converter bolts but it sure would beat dropping it completely...lol... I know I thought about having a shop don't while I'm on the road, but $800-1000 can be wasted other places than being lazy. I've had the trans out twice in 10 years or was easier to pull when it had leafs and no belly skid and rear link crossmember ...its easy straight forward just time consuming when done in a driveway on your back .