So my girl had my XJ today and when she pulled up at my job she tells me "She stalled out twice in a parking lot and the Check Guages light came on and the Check engine light came on" I work at AutoZone so I pulled the OBDII scanner out right away and got these following codes:
P0700-
Car and Van
Definition- Transaxle control system fault
Explanation- ECM received a signal that the transaxle control module has a fault.
Probable cause- Shorted or open circuit within transaxle
OR Failure of transaxle control module
P1694-
Definition- CCD messages received from the ECM
Explanation- ECM has not received any CCD messages from the Aisin trans module within the ECM.
Probable causes- CCD bus line open OR Failed ECM
P1698-
Definition- Fault-no CCD message from TCM
Explanation- Failed ECM
Probable cause- Open CCD bus line OR Failed TCM
I drove it home and my guages are going off then back to normal and the dash lights, radio, interior lights are all flickering like crazy. I was cruising down the road and the RPM's jumped up slightly and jumped back down. WTH? Anyone experience this?
P0700-
Car and Van
Definition- Transaxle control system fault
Explanation- ECM received a signal that the transaxle control module has a fault.
Probable cause- Shorted or open circuit within transaxle
OR Failure of transaxle control module
P1694-
Definition- CCD messages received from the ECM
Explanation- ECM has not received any CCD messages from the Aisin trans module within the ECM.
Probable causes- CCD bus line open OR Failed ECM
P1698-
Definition- Fault-no CCD message from TCM
Explanation- Failed ECM
Probable cause- Open CCD bus line OR Failed TCM
I drove it home and my guages are going off then back to normal and the dash lights, radio, interior lights are all flickering like crazy. I was cruising down the road and the RPM's jumped up slightly and jumped back down. WTH? Anyone experience this?