DeftwillP
NAXJA Forum User
- Location
- Round Rock TX
What is the difference between the caster and the pinion angle on a HP d30? Assuming that regular balljoints are used and the knuckles haven't been cut and turned, there should be a fixed and set relationship between the two no matter what height of lift, right?
I've thown a cheap angle finder against the front of my ruffstuff cover and used gojeeps site to come up with the approximate caster. I can't seem to accurately find the pinion angle though. The point of all of this is that I'm wanting to do some offset balljoints so that I can point my pinion higher up and still get a high positive caster (6 to 8 degreees maybe).
Any help in this department?
(please don't respond with use adjustable control arms as you clearly didn't read my question)
I've thown a cheap angle finder against the front of my ruffstuff cover and used gojeeps site to come up with the approximate caster. I can't seem to accurately find the pinion angle though. The point of all of this is that I'm wanting to do some offset balljoints so that I can point my pinion higher up and still get a high positive caster (6 to 8 degreees maybe).
Any help in this department?
(please don't respond with use adjustable control arms as you clearly didn't read my question)